Kalkulátor projekční vzdálenosti Panasonic PT DZ16K

Power supply
200-240 V AC, 50/60 Hz (Max current requirements: 12 A @200 V)
Power consumption
2,150 W (0.3 W with STANDBY MODE set to ECO,*1
9 W with STANDBY MODE set to NORMAL.)
Dissipation BTU
Max. 7,338 BTU/hour (without light output: 7,127 BTU/hour)
DLP™ chip
Panel size

1. 1 mm (0.95 in) diagonal (16:9 aspect ratio)

Display method
DLP™ chip x 3, DLP™ projection system
Pixels
2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
Lens
Optional powered zoom/focus lenses
Lamp
420 W UHM lamp x 4, replacement cycle of up to 3,000 hours*2
Screen size (diagonal)

1. 78-25.4 m (70-1,000 in),
2. 78-15.24 m (70-600 in) with the ET-D75LE8, 16:9 aspect ratio

Brightness*3
16,000 lm (four-lamp)
Center-to-corner uniformity*3
90 %
Contrast*3
10,000:1 (full on/off, with dynamic iris set to "3")
Resolution
1,920 x 1,080 pixels
(Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)
Scanning frequency
SDI
3G-SDI
SMPTE ST 424 compliant,
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p,1080/24p, 1080/24sF, 1080/30p
HD-SDI
SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit]
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SD-SDI
SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
HDMI/DVI-D
480i4, 480p, 576i4, 576p, 720/60p, 720/50p,
1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA*5 (1,920 x 1,200),
compatible with non-interlaced signals only, dot clock: 25-162 MHz
RGB
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or less
YPBPR (YCBCR)
fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/Y/C
fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift
Vertical
±60 % (±50 % with the ET-D75LE6) from center of screen (powered)
Horizontal
±20 % (±15 % with the ET-D75LE6) from center of screen (powered)
Keystone
correction
range*6
Vertical
Vertical : ±40° with the ET-D75LE10/ET-D75LE20
(±22° with the ET-D75LE50, ±28° with the ET-D75LE6)
Horizontal
Horizontal: ±15°
Installation
Ceiling/floor, front /rear
Terminals
SDI IN
BNC x 1 (3G/HD/SD-SDI)
HDMI IN
HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
DVI-D IN
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB 1 IN
BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
RGB 2 IN
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN
BNC x 1 (composite video)
SERIAL IN
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT
D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN
M3 x 1 for wired remote control
REMOTE 1 OUT
M3 x 1 for link control
REMOTE 2 IN
D-sub 9-pin (female) x 1 for external control (parallel)
LAN
RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials
Molded plastic
Dimensions (W x H x D)
620 x 2917 x 800 mm (24-7/16 x 11-15/327 x 31-1/2 in) (optional lens not included)
Weight*8
Approximately 43 kg (94.8 lbs) (optional lens not included)
Operation noise*3
48 dB (quad lamp operation)
Operating environment
Operating temperature: 0-45°C (32-113°F)*9, operating humidity: 10-80 % (no condensation)
Applicable software
Logo Transfer Software, Multi Projector Monitoring & Control Software
Supplied accessories
Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)